Back to: All Products
Pipe and Fittings for Corrosion/Chemical Resistant Services
Largest (FRP) Fiberglass Pipe Inventory in the US, Supplied by Corrosion Fluid Products Corp.
Corrosion Fluid Products has represented the premier manufacturers of Lined Steel Pipe and Fiberglass Piping (FRP Pipe) for over 40 years. Our quality of product and reputation will provide peace of mind when you are transferring corrosive liquids in your plant. Safety of your plant personnel are first and foremost when we recommend and provide our equipment to your site.
Corrosion Fluid Products has the most extensive stock of any specialty pipe supplier in the Midwest, with capabilities to fabricate lined steel pipe spools within hours of receiving your order up to 8 inch diameters. With Conrac machines in many of our facilities, we are able to flare steel pipe to provide free floating flanges for easy flange alignment.
Our fiberglass pipe fabrication ability allows for quick installation of special piping configurations. Pipe Fittings, gaskets, and adhesives are available for immediate shipment.
Click on a link below or scroll down to browse our pipe and fitting capabilities:
Composite Fiberglass Pipe
Fiber Glass Systems' Smith Fibercast FRP piping employs a variety of epoxy and vinyl ester resins and, where necessary, corrosion barriers to achieve the optimum performance characteristics for virtually any application. Our broad range of temperature and pressure capabilities allows us to best match fiberglass pipe to the requirements of your specific application.
Strength Capability, Light Weight, Easy Fabrication/Installation, Corrosion/Chemical Resistant Exterior, High Flow Rates, Low Energy Consumption
Fiberglass Piping Options Supplied by Corrosion Fluid Products:
- GREEN THREAD® Composite Fiberglass Pipe:
For dilute acids, caustics and hot brine
- RED THREAD® II Composite Fiberglass Pipe:
For water, saltwater, CO2, crude oil, natural gas, HVAC piping, vent piping, light chemical: salts, solvents and pH 2-13 solutions
- CENTRICAST® RB-2530 & 1520 Composite Fiberglass Pipe:
For chemical process solutions, hot caustics, solvents, acids, salts and corrosive combinations
- CENTRICAST PLUS® CL-2030 & 1520 Composite Fiberglass Pipe:
For chemical process solutions, chlorinated mixtures, acids, and corrosive combinations
- Z-CORE® Composite Fiberglass Pipe:
***GREAT FOR HANDLING SULFURIC ACID, ANY CONCENTRATION***
For aggressive solvents--methylene chloride and acetone; corrosives such as 98% sulfuric acid
- F-CHEM® Composite Fiberglass Pipe:
For water, brine, caustics, petroleum products, acids and many chemical waste streams
- CERAM CORE® Abrasion-Resistant Composite Fiberglass Pipe:
For severe abrasive conditions in high flow velocities such as bottom ash, sand lines and mine tailings
- Silver Streak® Abrasion & Corrosion Resistant Composite Fiberglass Pipe:
For abrasive and corrosive service applications such as limestone and gypsum slurries in flue gas desulfurization (FGD) scrubbers
- Secondary (Dual) Containment Composite Fiberglass Piping Systems
Smith Fibercast offers secondary (dual) containment piping systems with two-piece (clam shell) fittings that meet EPA requirements and help protect the environment by containing possible fluid leaks in case of damage to the system.
- Composite Fiberglass Pipe Fittings and Accessories (FRP Fittings)
Smith Fibercast offers a complete line of frp fittings manufactured from both epoxy and vinyl ester resins. These fittings and adhesives provide the same corrosion resistance and temperature ratings as the complete grade of FGS Smith Fibercast pipe.
- Fiberglass Pipe Case Histories
- Smith Fibercast Fiberglass Pipe Overview (PDF)
Plastic Lined Steel Pipe
The right piping system is needed when handling acids, corrosives, or hazardous materials. Plastic-lined pipe combines the best of both common piping systems, metallic and nonmetallic piping, into one. We can quickly furnish any fitting configuration and pipe pressure rating you may need for your process. Our plastic-lined pipe systems provide the chemical resistance of plastics, fluoropolymers, and the inherent strength of steel piping systems.
Product Range: Corrosion Fluid Products carries polypropylene, Kynar and PTFE-lined pipe. We have Resistoflex Thermalok steel pipe with PTFE liner, Swaged Pipe steel tubing which is mechanically reduced around the plastic liner and Conquest Pipe, designed to minimize the number of flanged connections in the process line.
NIBCO® Chemtrol® Pipe & Fittings
Chemtrol® fittings are unsurpassed in performance and longevity, offering dependability in the most demanding applications.
Chemtrol Solid PVDF is a strong, tough, and abrasion-resistant fluorocarbon material. It resists distortion and retains most of its strength to 280°F. It is chemically resistant to most acids, bases, and organic solvents and is ideally suited for handling wet or dry chlorine, bromine and other halogens.
Corzan® is a registered trademark of The Lubrizol Corporation.
Kynar® is a registered trademark of Arkema Inc.
NIBCO® Plastic Pipe & Fittings
Count on NIBCO's dependable and corrosion-resistance plastic piping products for applications that include water delivery; drain, waste and vent (DWV); and sewage disposal.
Piping Gaskets and Accessories
We proudly carry PureFlex Task-Line TFE-lined piping gaskets, lined paddles, and lined pipe blockers. We also handle Ramco Shields that resist hazardous or toxic chemicals, Fike Rupture disks, and many types of corrosion-resistant gaskets like TFE/EPDM/Neoprene Gaskets.
Etheylene T-Line™ Lined Strainers
The ETHYLENE T-Line™ Pipe Strainer delivers maximum flow and chemical resistance while protecting your downstream equipment from the catastrophic damage of in-line piping debris. The strainer housing is lined with ETFE (standard) or PFA (optional) and the basket is solid PTFE. T-Line Pipe Strainers™ are rated at 150 psi, available in sizes 2" to 8" and can operate continuously up to 400ºF.
- Maximum Chemical Resistance
- Abrasion Resistant
- Maximum Flow Rates
- Full Vacuum Rated
- Solid PTFE Basket
- Size Range 2" - 8"
- Temperatures to 400ºF (PFA)
Click on the animation below to view Ethylene's T-Line™ Strainer in action!
(Animation may take longer to load on slower connections)
Flowserve Atomac Lined Pipe Strainer
The ASF combines a PFA lined body with an ETFE filter screen supported between TFE cylinders for a chemically impermeable assembly to remove small solids from the process stream.Standard mesh is 60 (300 micron). Optional mesh: 169 (100 micron);35 (500 micron); 19 (1,000 micron). Other mesh openings on request.
The flow path through the filter insert is a larger area than the original pipe cross-section. This minimizes possible pressure loss.
This design offers the same outstanding corrosion resistant properties as the FEP or PFA lining material.
- Easy Servicing and Maintenance: The filter insert can be changed or cleaned without removing the strainer from the line.
- The residual fluid in the insert area can be removed by means of the PTFE drain plug.
- An optional ball valve may be specified in place of the PTFE drain plug.
Availability: MI, IL, OH, PA
More Info on Flowserve's Atomac Lined Pipe Strainer